Products
Browse by product category. Each product page brings its models, technical drawings and configuration options together.
Technologies
Cooling, vacuum, monitoring and water conditioning.
Monitoring Systems
Monitor cooling-water output or test cooling lines.
Monitoring System · Cool Leak Test
Water Conditioning Systems
Reduce blockage and control cooling-water temperature.
AquaControl 50 · 75 · 100
Mold Consumables
Core pins and localized cooling components for the tooling.
Jet Coolers
Targeted cooling in core pins and narrow passages.
JCT · JCO · JCT-C · JCO-C · JCR · JCI
Mold Cooling Optimization Devices
Water distribution, visual flow indication and pin breakage detection.
Block Type Manifolds
Machined from a single steel block; one-way or two-way arrangements.
BTMW1-10 · BTMW2-10 · 16 bar
Visual Flow Manifolds
Rolling balls give a visual indication of water flow at the outlet.
VFM-10 · 10 connections · 16 bar
Pin Breakage Detection Device
Checks for abnormal conditions after the shot and supports pin-breakage detection.
PBDD-10 · 24 V DC · 16 bar
Injection Parts
Shot sleeves, plunger tips, sprue bushes and diffusers, made to the application drawing.
Shot Sleeves
One- or two-part designs, fully or partially cooled; vacuum arrangement available.
H13 / DIN 1.2344
Plunger Tips
Precision-machined and ground; specified to the sleeve and injection assembly.
H13 / DIN 1.2344
Sprue Bushes & Diffusers
Hardened and nitrided; integral, jacket or conformal cooling options.
H13 / DIN 1.2344
Choose by the task you need to solve
Starting points for an application discussion.
| Your task | Explore |
|---|---|
| Cool a narrow passage inside a core pin or insert | Jet Coolers · Core Pins |
| Supply and control the jet cooling cycle | Jet Cooling Machines |
| Cool a localized area of an insert | Spot Coolers |
| Evacuate air from the mold or shot sleeve | Vacuum Machines |
| Measure flow and temperature, or test a cooling line | Monitoring Systems |
| Distribute water or observe the outlet circuit | Mold Cooling Devices |
| Reduce blockage from your cooling water and control its temperature | Water Conditioning Systems |
| Specify or replace a part in the injection assembly | Injection Parts |